Magnetic Dry-Erase DIY Whiteboard

TURN FLAT SURFACES INTO A CUSTOM DRY-ERASE MAGNETIC WHITEBOARD !

Turn virtually any smooth, flat surface into a magnetic whiteboard. Films can easily be cut to custom sizes or attached in blocks to make a larger dry-erase surface. No need for screws, nails or bulky stands to hold up a whiteboard, this film hold firm with permanent adhesives. Your wall, door, cabinet, dresser or bookshelf backs can become a magnetic dry-erase surface - ideal for home offices/classrooms for teaching and organizing. Apex Dry-Erase specialty film is also much more affordable than a traditional magnetic whiteboard.

Installing magnetic dry-erase whiteboard film is a two step/two film process: Pricing reflects cost for both films. First an adhesive magnetic substrate is affixed to wall or other flat surface (this is a permanent layer). The substrate is 23.5" in width, therefore, for larger boards strips of base layer will be applied adjacent to achieve appropriate size. The second step is a sheet of low-tack dry-erase film. This film will be the size of the board you ordered or slightly larger. This layer is low tack and may be replaced in future with a different layer should you want to create a new look or feel.

Please contact us by email for pricing on custom-printing on your whiteboard: We can print a pattern, grid lines, columns, headings, logos, etc. in virtually any colour! great for businesses, classrooms and more, email us at info@apexfilms.ca

60" sizes are subject to additional handling charges based upon destination, should an additional charge be required you will be notified before shipping and given the option to select a smaller size.

*PLEASE NOTE: Apex Dry-Erase film can be applied to most clean, flat and smooth surfaces. Damaged or flaking surfaces my interfere with adhesion. Must be used with Dry-Erase markers (not included).

**Coupon valid until March 31, 2021, while supplies last; Apex reserves the right to limit quantities.